LS25 Machine Drive Controls v1.0.0.0
LS25 Machine Drive Controls v1.0.0.0
This mod is designed to make better use of controller hardware with the Moza Farming Control System specifically in mind but should work with similar hardware and/or peripherals that contain toggle switches, etc.
MAIN FEATURE: Provides a shop configuration that makes Hydrostatic drive an option. Perfect for vehicles like combines or forage harvesters, it enables stop-and-go braking with automatic direction change to make full use of the throttle control on the FCS controller, while standard mode keeps those options turned off for non-hydrostatic vehicles.
Additional features: This mod configures how the toggle switches to work like true toggle switches. It provides configurable keybinds in the control menu to separate on and off functions. For example, PTO switch: up is on, down is off. This can also apply to the rotary switches on the FCS.
Propulsion and throttle have been separated to make the stick more realistic. The vehicle can be moved at the engine speed you set instead of increasing or decreasing with the propulsion lever. Throttle can be controlled via the encoder dials or other keybindings of your choosing. Increase or decrease with a twist of the knob; pressing the knob will activate the throttle to hold at idle or reset to idle from a higher rpm. Includes a small hud to show the stick input to help find true center, along with an indicator to show if the throttle control is active or inactive.
Raise and lower commands have been separated into separate commands.
Controls are configurable in the keybind menu
IMPORTANT NOTE: Currently, when selecting the toggle keybinds, when trying to set the down position, the game will register the command as both positions. For example, if the toggle is 45 and 46 it will natively set 45 but 46 registers as 45 + 46. After setting the keybinds to your liking, save and quit the game, then restart. The mod corrects the dual key on restart. The same applies to the rotary switch setting but if you set it from high to low it will register as one control. (To set 34, start with switch on 35 and turn to 34. 33 to 34 results in 33 + 34. ) IF CONTROLS DO NOT WORK, CHECK FOR CONFLICTING KEYBINDINGS.
Please feel free to give suggestions for command settings you need toggles or support for.
